NKT Photonics Koheras BOOSTIK LC, Product Manual

Page: 43 / 68

43
Module overview
The following information is available from each of the available fields:
Table 6 Module overview fields
Toggling and
sorting the
overview fields
In the module overview, you can sort the order of the fields and select the fields
to display.
Setting the field order
With your mouse, click-hold on a field in the header and drag it to a new location
to change the order of the fields in the header.
Togging fields on and off
Right-clicking on any of the fields in the header displays the menu shown in
Figure 29 .
To remove a field from the overview, click once on the any of the fields (except
for Module) to uncheck it. Clicking once on an unchecked field, adds it back to
the overview.
Column heading Description
Module Chassis slot number
Reference WL Base wavelength of the module in nm
Actual WL Output wavelength of the module in nm
WL offset Setpoint Wavelength offset set with CONTROL in pm
Actual WL offset Measured wavelength offset in pm.
Status Module status indicator
Power setpoint (mW) Power level set with CONTROL in mW
Actual power (mW) Measured power level in mW
Power setpoint (dBm) Power level set with CONTROL in dBm
Actual Power (dBm) Measured power level in dBm
Emission Displays status of module emission:
•
Red ON - emission enabled
•
OFF - emission disabled
Interlock Displays status of the interlock circuit:
•
Green ON - Interlock circuit closed
•
Red ON - Interlock circuit open or key switch
off.
Error code Error code for an existing module fault - contact
NKTP support of the error persists.
Module Serial Factory serial number of the module.
FW. Ver. Firmware currently executing on the module.
Module Temp Temperature within the module.
User Text Text describing the module – see View on
page 35 .