NKT Photonics Koheras BOOSTIK LC, Product Manual

Page: 25 / 68

25
Interlock
Figure 10 Example custom mount installation
Custom installation
rules
•
Allow for proper ventilation and cable access.
•
Do not store or place anything on the top panel of the amplifier.
•
Ensure the ambient operating temperature and humidity is stable as stated in the
Table 11 on page 53 .
•
Avoid placing the amplifier near sources that could cause temperature
fluctuations.
•
The surface the amplifier is placed on, must be free of vibration or mechanical
shocks.
•
Ensure to provide a thermal cooling path from either the rear or side panel.
•
Do not bend the fibers below a bend radius of 10 cm.
•
The amplifier is a Class 4 laser and as such the installation area must follow all
regional laser safety regulations as defined by the assigned Laser Safety Officer
(LSO).
Interlock
The BOOSTIK LC includes a safety Interlock function. The function shuts down the
emissions immediately when a circuit loop connected to pins A3 and A4 is either
opened or shorted to ground.
M6 x M6 x
？
bolt bolt
M6 x M6 x
？
bolt bolt