Instruction Manual
NivuLink Micro
page 22
NivuLink Micro - Rev. 02/13.11.2018
5.2 Device identification
The instructions contained within this manual are valid only for the type of device
specified on the title page.
The device label for the NivuLink Micro is attached to the outside of the enclosure
and contains the following information:
•
Name and address of the manufacturer
•
CE label
•
Information on type and series, serial no. if available.
Fig. 5-3: Device label on the NivuLink Micro data logger
5.3 Device status
The LEDs (
) show the status of the NivuLink Micro.
Red
Yellow Green Status
on
on
on
Operating mode, NivuLink Micro is scanning or trans-
mitting data
on
off
on
Configuration mode
off
off
off
Sleep mode or the battery is discharged
5.4 Pin assignment
5.4.1
Battery
Battery pin assignment:
PIN
Assignment
1
+V
bat
2
+V
bat
3
GND
4
Temperature sensor input
