Instruction Manual
NivuLink Micro
page 16
NivuLink Micro - Rev. 02/13.11.2018
2.4 Shutdown Procedures
WARNING
Danger by electric voltage
Prior to beginning maintenance, cleaning and / or repair works (to be executed by
qualified expert personnel only):
−
disconnect the device from mains power supply or disconnect the re-
chargeable battery
−
Safeguard the higher system from restarting
2.5 User’s Responsibilities
Important Note
In the EEA (European Economic Area) national implementation of the frame-work
directive 89/391/EEC and corresponding individual directives, in particular directive
2009/104/EC concerning the minimum safety and health requirements for the use
of work equipment by workers at work, as amended, are to be observed and ad-
hered to.
In Germany the Industrial Safety Ordinance shall be observed
Make sure to have a local operating permit available and observe the associated
conditions. In addition to this you must observe environmental requirements and
local laws on the following points:
•
Personnel safety (accident prevention regulations)
•
Safety of work materials and tools (safety equipment and maintenance)
•
Disposal of products (laws on wastes)
•
Disposal of materials (laws on wastes)
•
Cleaning (cleansing agents and disposal)
Connections
Operators shall make sure prior to operating the instrument that during installation
and initial start-up the local regulations (such as regulations for electrical connection)
are observed.
