You can prepare milk directly from the pack or from a different container with the special milk frother
and fill directly into the cup or into the glass.
➔
Connect the suction tube to the milk frother (picture 10).
➔
Connect the other end of the suction tube to the milk container (designs 670 and 680 only)
(picture8) or submerge it directly into the milk carton or into a different container.
Warning: Ensure that the tap of the spumatore is upright. This is how the frothed up milk is created.
➔
Turn the rotary to “CAPPUCCINO’’.
Information: The display shows the current settings in the lower row. The
strength
is shown on the left,
the flavour profile in the middle and the amount of milk froth on the right.
➔
Press the rotary.
The display shows “PLEASE PLACE CUP UNDERNEATH THE MILK FROTHER’’. Simultaneously the
device is grinding the coffee already.
➔
Place the cup underneath the
milk forther (picture 1/P)
Information: By flashing of the strength in the lower row of the display it is shown that you can now
change this parameter by turning the rotary.
➔
While the bean symbol is flashing for the strength, turn the rotary to adjust the strength. Clock-
wise stronger and anticlockwise weaker.
The appliance is heating. Then, the display shows “OPEN VENT’’.
➔
Turn the steam-hot water- rotary knob (picture 1/C) clockwise up to the stop.
Information: The display shows the current settings in the lower row. The strength is shown on the left,
the flavour profile in the middle and the
amount of milk froth
on the right.
Information: By flashing of the amount of milk froth in the lower row of the display it is shown that you
can now change this parameter.
➔
While the ml-display for the milk froth is flashing, turn the rotary to change the amount of milk
froth. Clockwise stronger and anticlockwise weaker.
As soon as the desired amount of milk froth is prepared, the display shows “CLOSE VENT’’.
➔
Turn the steam-hot water - rotary knob (picture 1/C) anticlockwise to the 0-setting.
“Please turn the Steam/Hot Water Tap (Illustration 1/C) clockwise to the Zero Position at the latest,
when enough milk has been drawn.”
The display shows “PLEASE PLACE CUP UNDERNEATH COFFEE OUTLET’’.
➔
Now, place a cup or a glass underneath the
coffee outlet (picture 5).
Information: By flashing of the amount of coffee in the lower row of the display it is shown that you can
now change this parameter.
➔
While the ml-display is flashing for the amount, turn the rotary to adjust the amount. Clockwise
stronger and anticlockwise weaker.
You can change the standard setting in two ways as follows:
4.3.1. Live programming for Cappuccino and milk froth ( designs 670 and 680 only)
You can change and save the standard setting during the preparation as follows.
➔
Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing
the rotary.
18
•
4. Prepare coffee specialities
