➔
Turn the rotary to the beverage of your choice (i.e. Espresso).
Information The display shows the current setting of the selected coffee specialities in the lower row.
The strength is shown on the left, the flavour profile in the middle and the amount on the right.
Information Take into consideration whether you prepare one or two cups and place the cups under
the outlet respectively (picture 5 and 6).
➔
Press the rotary for the beverage preparation.
The cup lighting is switched on (only designs 670 and 680). The appliance is preparing a cup of the
selected beverage in the standard setting.
Preparation of two cups
Information: 2 cups can be prepared simultaneously with beverages without milk and without hot water
only. With Cappuccino and Cafe Americano, several beverages can only be prepared one after another
and not at the same time.
➔
To prepare two cups directly one after another, press the rotary once again immediately after the
start.
➔
If you would like to cancel the preparation, press the rotary once again.
The display shows “CANCELLED’’. The appliance cancels the supply and returns to the main menu.
You can change the standard setting in two ways as follows:
4.2.1. Live programming for Espresso and coffee (designs 670 and 680 only)
You can change and save the standard setting
during the preparation as follows.
➔
Choose the menu option “SETTINGS’’ in the main menu by turning the rotary and then pressing
the rotary.
➔
Turn the rotary to “BEVERAGES RECIPES’’. Press the rotary.
➔
Turn the rotary to the beverage of your choice. “ESPRESSO’’). Press the rotary.
➔
Turn the rotary to “LIVE PROGRAMMING’’.
➔
Place a cup or a glass underneath the outlet (picture 5).
Information: Should you wish to cancel the Live programming after the start, hold the rotary down for
longer than three seconds.
➔
To change the standard setting press the rotary now.
The display shows “SELECT STRENGTH’’.The display shows “SELECT STRENGTH’’.
➔
Turn the rotary to select the strength of your choice (weaker to the left and stronger to the right).
➔
Press the rotary to confirm the choice of your strength.
The display shows “SELECT FLAVOUR’’.
➔
Turn the rotary to set the flavour profile of your choice (for the explanation of the flavour profiles
see point 3.3).
➔
Press the rotary to confirm your choice of flavour.
The display shows “PLEASE WAIT’’. The device is grinding, heating and will then start with the
preparation.
The display shows “STOP COFFEE?’’
➔
Press the rotary when the desired amount of coffee is prepared.
The standard setting for the beverage of your choice (i.e. Espresso) is now changed and saved. The
display shows “RECIPE CREATED’’ for a short amount of time and returns to the main menu with the
new standard settings.
16
•
4. Prepare coffee specialities
