background image

14

We strongly recommend that all actions on the glider were advised for 
professionals.

Always check all the flying equipment before every flight. 

In spite of providing much more benefits to the pilots, 2 liner gliders need 
more care and control of the calibration. The ICEPEAK 7 PRO-MODEL 
unsheathed lines resistance is guaranteed under 150 +/- hours. The 
resistance to the UV is one of the highest. With a 2 liner glider every 
little variation on the calibration of the lines has a directly effect on the 
performance of the wing.

We recommend checking the lines calibration after the first 30 hours +/- 
of flight. This examination must be taken apart from the regular checking 
every 100 hours of use or every two years (whichever happens first).

Why is it necessary?

Thanks to the experience acquired with the 2 liner gliders on the previous 
seasons and to the incessant control task of our R&D team over the Abac 
Team gliders, we are capable now of predicting how to take appropriately 
care of this kind of lines to assure the best performance of the profile. 
Following the controls recommended the glider will keep its original 
features for longer.

The conditions of the flight zone, the climate area, temperature, humidity, 
wing load, …cause a different impact over the wing. That’s why the 
calibration would be set taking in consideration these factors.
Only qualified professionals should realize it. Do not modify the wing 
considering the calibration required for other pilots before being sure that 
it is really necessary for us.

8.4 REPAIRS

If the wing is damaged, you can temporarily repair it by using the rip stop 

found in the repair kit, so long as no stitches are involved in the tear. Any 
other type of tear must be repaired in a specialized repair shop or by 
qualified personnel. Do not accept a home repair.

9. SAFETY AND RESPONSIBILITY

It is well known that paragliding is considered a high-risk sport, where 
safety depends on the person who is practising it.

Wrong use of this equipment may cause severe injuries to the pilot, even 
death. Manufacturers and dealers are not responsible for any act or 
accident that may be the result of practicing this sport.

You must not use this equipment if you are not trained. Do not take 
advice or accept any informal training from anyone who is not properly 
qualified as a flight instructor.

10. GUARANTEE

The entire equipment and components are covered by a 2-year 
guarantee against any manufacture fault.

The guarantee does not cover misuse or abnormal use of the materials.

Summary of Contents for ICEPEAK 7 PRO-MODEL






















Reviews: