background image

4

1. CHARACTERISTICS

1.1  WHO IS IT DESIGNED FOR?

The ICEPEAK 7 PRO-MODEL has been designed for experienced pilots 
and those wishing to compete in high performance competitions. It 
has been conceived for competition; therefore, it has an extraordinary 
capacity to fly kilometre after kilometre with an intensive pace. Its 
strengths are its glide, its excellent rapid ascent in thermals and its speed 
when flying. Moreover, it provides to the pilot a perfect transmission of 
the air flow and an incomparable security sensation in its category.

Description of the skills and experience required for this glider:
For those pilots used to recovery techniques, active piloting, to fly on 
turbulent conditions and capable of flying these kind of demanding 
gliders.

1.2 CERTIFICATION

The ICEPEAK 7 PRO-MODEL has successfully achieved the European 
EN/LTF certification. This test was carried out in the Swiss Air-Turquoise 
laboratories in Switzerland. All the commercially available sizes passed 
every required test with excellent results and the ICEPEAK 7 PRO-
MODEL received EN D / LTF D certification for all sizes. 

The ICEPEAK 7 PRO-MODEL passed the essential load test of 8g 
without experiencing any problems.

We recommend paying special attention on the flight test report made 
by the certification laboratory, and specially attention to the test pilot 
comments (Point 25 on the flight test report).

On the flight test report there is all necessary information to know how 
the new paraglider will react on each manoeuvre tested.
It is important to take into account that each size can have a different 

reaction on the same manoeuvre. Furthermore, the same size on 
maximum load or minimum load can experiment a different behaviour.

Description of flight characteristics on D class:

Paragliders with very demanding flying characteristics and potentially 
violent reactions to turbulence and pilot errors.Recommended for 
experienced and regularly flying pilots.
The intervention of the pilot is needed to recover a normal flight state.

Check the certification results and figures on the last pages of this 
manual or at 

www.niviuk.com

1.3 IN-FLIGHT BEHAVIOUR

Designing a new high-featured and accessible glider is the result of 
years of research and extensive testing flights under all conditions and in 
different places in order to provide an easy piloting wing.

Its new profile makes the most of the airflow to maximize the efficiency 
of the glider. More compact and clean leading edge. New materials in the 
internal part of the glider to provide the endurance needed in competition 
and lightness.

Excellent feeling on thermals, better climb rate and stall recovery. 
The outcome of putting all this technology together is a trusty and 
stable glider even at maximum speed. It is more demanding, but 
providing fantastic turning for a 2-liner glider and the same comfort that 
characterize all Icepeak models. 

With an aspect ratio of 7.5, it is a 2 liner wing that provides clear and 
useful information to the pilot; it usually situates itself into the centre of 
the thermal or it follows the ascendant (good) air flow. While flying the 
ICEPEAK 7 PRO-MODEL the pilot feels that can reach his full potential.
In thermals, you will realize that you are piloting a glider with a big 

Summary of Contents for ICEPEAK 7 PRO-MODEL






















Reviews: