Thermo Scientific AquaSensors
™
AV88 Universal Analyzer User Guide
47
7.1.
Assigning 4 mA and 20 mA parameter values
Press MENU from the Measure screen
Use the UP/DOWN arrows to select Analog Output (or Analog Output 1, Analog Output 2 depending on
hardware options).
Use the ENTER key to configure the Analog Output of choice. In this example Analog Output 1 is shown.
Use the UP/DOWN arrows to scroll through the Analog Output configuration options of Set 4 mA Value, Set 20
mA Value and Calibrate.
Figure 8.1: The complete analog output menu.
Main Menu
Analog Output 1
MENU
ESC
ENTER
Main Menu
Calibrate
MENU
ESC
ENTER
991.3
S/cm AB
30.8 °C
MENU
ESC
ENTER
Analog Output 1
Set Parameter
Set 4mA Value
Set 20mA Value
Calibrate
Exit
