15
RIDING
WARNING
Review Vehicle Safe Riding, before you ride.
1.
After the engine has been warmed up, the vehicle is ready for riding.
2.
End braking state of the vehicle.
CAUTION
Riding with only one hand may cause the vehicle out of control.
3.
Open the throttle gradually so the vehicle moves forward.
4.
To speed down the vehicle, reduce the throttle while carry out braking. Coordinate the throttle with brakes for smooth
deceleration.
NOTE
Both the front and rear brakes should be used at the same time and should not be applied strongly enough to lock the
wheel, or braking effectiveness will be reduced and control of the vehicle be difficult.
Summary of Contents for ZTR Series
