39
Defective gear shifting cylindrical cam and poking fork
Replace cam or shifting fork
Chapter 5 cooling sysytem Troubleshooting
Engine problem: engine has a poor power, pointer of water temperature indicator is long-‐standing in red area, cooling fluid
boil and jet from tank.(It’s normal if the pointer reach to red area for short time .)
Reasons for water high temperature:
1
.
Water temperature indicator or thermoswitch is damaged.
2
.
Radiator cover is damaged: main valve or negative pressure valve is not sensitive.
3
.
Radiator or radiating fin is pluged.
4
.
The cooling fluid in radiator is not enough, the installation position of radiator or water pipe is too low to cause that
the cooling fluid has a bad circulation.
5
.
Water pipe or water jacket is jammed.
6
.
Water pump runs badly.
7
.
Cooling passages have a poor exhaust.
8
.
Small circulation passages of radiator is leak.
9
.
The spare water tank of radiator do not connect with atmosphere.
10
.
The reasons that water temperature indicator can’t point temperature change or it has a badness indication.
Summary of Contents for ZTR Series
