Nitro motors ZTR Series, Manual

Page: 26 / 50

18
AIR CLEANER
The air cleaner should be serviced at least once every 30-­‐day’s drive. Service more frequently when riding it unusually wet
or dusty areas. See your dealer for further information.
1. Remove the air cleaner from the frame.
2. Disassemble it and take out filter element.
3. Wash the filter element in clean, nonflammable or high flash point solvent and let it dry.
WARNING
Never use gasoline or low flash point solvents for cleaning the filter element, otherwise, a fire or explosion could result.
4.
Soak it in gasoline engine oil Class 15W/40QE until saturated, and then squeeze out the excess oil.
5. Clean the inside and outside of the air cleaner housing.
6.
Install the removed parts in the reverse order of removal
.
CAUTION
●
It is forbidden to start the engine without the air cleaner core, or premature wear of piston and cylinder may produce.
●
Make sure the air cleaner core in intact.
●
Prevent the air cleaner core from getting water when washing the vehicle.
CHECK LEAKS ALONG AIR SUPPLY LINE
Check leaks regularly along air supply line, and repair or replace related parts once there are some to assure a normal air
supply.