7. How to use the PNT1000
WARNING
●
Read “ Safety Precautions” (See P.1, 2) thoroughly before you use this tool
and be sure to observe the instructions.
●
Before you start fastening POP Nuts with this tool, be sure to adjust each
part according to the instructions.
●
Wear safety goggles (satisfying JIS T8147).
●
When you use this tool, do not point this tool towards anybody else or look
into the tool from front or back.
≪
Procedure
≫
(1) Mounting
When the Pop Nut is gripped gently and pressed by the mandrel with a force of
approximately 49N or more, the mandrel turns clockwise.
Screw the Pop Nut down onto the mandrel.
Once the flange of the Pop Nut comes into contact with the nose piece, the
clockwise rotation of the mandrel stops automatically.
Mandre
Figure 7-1
Caution
Be careful not to catch your finger in.
[Precautions on mounting]
Keep pushing until the clockwise rotation of the mandrel stops automatically.
If the Pop Nut is not fully mounted, the caulk stroke will be inconsistent.
NG
OK
16
