NIPPON Genetics EUROPE – www.nippongenetics.eu
30
With the
μ
L unit selected, the Notice mark
is turned off while the
μ
L unit mark lights
up.
With the mg unit selected, the Notice mark
blinks while the
μ
L unit mark is turned off
Method for selecting the mg unit
[ 1 ] Press the Back key to enter the mode
to select an operation mode.
[ 2 ] Press the Up or Down key to select
the system setting mode “SYS”.
[ 3 ] Press and hold the Enter key for
approx. three seconds.
[ 4 ] The unit currently selected is displayed.
* The calibration data reverts back to the factory default once the weight unit is switched.
12-4
Weight calibration function (mg calibration function)
The density of a liquid varies depending on the type and concentration of the material. Make sure to
perform mg calibration when you dispense a different sample or use the mg unit for the first time.
Further, when you need to always control dispensed amounts in a precise manner, perform mg
[ 5 ] Press the Up or Down
key to select the unit.
[ 6 ] Press Enter key to
confirm.
(Unit in
μ
L)
(Unit in mg)
Summary of Contents for FASTGENE ELECTRONIC PIPETTE-10
Page 1: ...1 ...
