25
26
AUS 1800 099 385 or NZ 0800 112 660
ninjakitchen .com . au
ENGLISH
ASSEMBLING YOUR
AUTO-SPIRALIZER
IMPORTANT:
Review all
warnings on pages 3–6
before proceeding.
IMPORTANT:
As a
safety feature, if the
Spiralizer Bowl and
Feed Chute Lid are not
properly installed, the
timer will display “- --”
and the motor will
be disabled.
NOTE:
To fit properly, the
tabs on the sides of the
Blade Disc must align with
the gaps on the top of the
Collecting Bowl.
NOTE:
The Spiralizer
accessory is only intended
for processing of fruit and
vegetables. Processing hard
ingredients such as cheese,
meats, and dried foods is
not recommended.
1
Place the unplugged motor
base on a clean, dry, and
level surface such as a
countertop or table. Press
downward on the motor
base to adhere the suction
cups to the work surface.
Plug the motor base into a
wall outlet.
2
Lower the Spiralizer Bowl
onto the motor base.
3
Rotate the Spiralizer Bowl
clockwise until it clicks into
place.
4
Place the Collecting Bowl inside the
Spiralizer Bowl, aligning it over the gear post.
5
Choose your Blade Disc, making sure to
handle it carefully.
6
Install the Blade Disc onto the top of the
Collecting Bowl. The rim of the Blade Disc
should sit flush against the top of the bowl,
and the tabs on the sides of the Blade
Discs must align with the slots on the top
of the Collecting Bowl.
7
Assemble the Feed Chute Lid on top of
the Spiralizer Bowl. Turn the lid clockwise
onto the Spiralizer Bowl, aligning the gray
tabs on the lid with the front of the bowl.
When the unit is connected to power and
the container is correctly assembled onto
the motor base, press the Power symbol to
turn unit on. The GO button will illuminate,
indicating the unit is ready for use.
