background image

5

6

AUS 1800 099 385 or NZ 0800 112 660

ninjakitchen .com . au

ENGLISH

24

 

DO NOT

 operate the appliance with an 

empty container.

25

 

DO NOT

 fill containers past the max fill or 

max liquid lines.

26

 

DO NOT 

microwave any containers or 

accessories provided with the appliance.

27 

Before operation, ensure all utensils are 
removed from containers. Failure to remove 
utensils can cause containers to shatter 
and potentially result in personal injury and 
property damage.

28

  Keep hands and utensils out of container 

while blending to reduce the risk of severe 
injury to persons or damage to the blender. 
A scraper or spatula may be used but must 
be used 

ONLY

 when the appliance is not 

running. 

29 

NEVER

 operate the appliance without lids 

and caps in place. 

DO NOT 

attempt to 

defeat the interlock mechanism. Ensure 
the container and lid are properly installed 
before operation.

30 

DO NOT

 expose the containers and 

accessories to extreme temperature 
changes. They may experience damage. 

31

 

NEVER

 leave the appliance unattended 

while in use.

32

 

DO NOT 

open pour spout cover while 

blender is operating.

33

 

DO NOT

 blend hot liquids. Doing so may 

result in a pressure buildup and steam 
exposure that can pose a risk of the user 
being burned.

SAVE THESE INSTRUCTIONS

34

 If you find unmixed ingredients sticking to 

the sides of the pitcher, stop the appliance, 
remove the lid, and use a scraper or 
spatula to dislodge ingredients. 

NEVER

 

insert your hands into the pitcher, as 
you may contact one of the blades and 
experience a laceration.

35

 

DO NOT

 attempt to remove the container 

and lid from the motor base while the 
motor and Stacked Blade Assembly are still 
spinning. Allow the appliance to come to a 
complete stop before removing the lid and 
pitcher.

36

 Upon completion of blending, ensure 

the Stacked Blade Assembly is removed 

BEFORE

 emptying pitcher contents. The 

Stacked Blade Assembly is to be removed 
by grasping the top of the shaft and lifting 
from the pitcher. Failure to remove the 
Stacked Blade Assembly before emptying 
the pitcher can result in a risk of laceration.

37

 If the appliance overheats, a thermal switch 

will activate and temporarily disable the 
motor. To reset, unplug the appliance  
and allow it to cool for approximately  
15 minutes before using again.

38

 The maximum wattage rating for this 

appliance is based on the configuration 
of the Stacked Blade Assembly and Total 
Crushing Pitcher. Other configurations may 
draw less power or current.

39

 

DO NOT 

spray the motor base or 

touchscreen with water or other liquids. 

40

 Turn off the appliance and unplug the 

motor base before cleaning.

IMPORTANT SAFETY INSTRUCTIONS 

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

 WARNING

  To reduce the risk of injury, fire, electrical shock or property damage, basic 

safety precautions must always be followed, including the following numbered 

warnings and subsequent instructions� This appliance shall not be used by 

children� Keep the appliance and its cord out of reach of children� Children 

shall  not play with this appliance�

Summary of Contents for CT682ANZ




















Reviews: