Notice
：
It only exert pressure to skidding point when tighten the delivery belt. tighten the
delivery belt over will damage the bearing of delivery belt
--- Tighten the screw of tightness pulley again
--- Reinstall the paper feeding table
5.1.2 Inspecting the abrasion of delivery belt
It will cause abrasion after a long time work .when the weave of the belt can be
saw, you should replace the belt.
--- Inform of the sale-after service department
--- Replace the delivery belt
5.1.3 Cleaning the delivery belt
Inspect the delivery belt once a month
--- Shut down
--- Remove paper feeding table and control panel front of tightness belt.
--- Cleaning dust and waste
--- Reinstall paper feeding table and control panel
5.2
Inspecting the tightness of chain belt
Inspecting the new machine once a week in the first month, then once a month
--- Shut down
--- Remove left cover
--- The chain must droop 4mm to 10 mm
When the tightness of chain need tighten
--- Loosen the tightness screw until the chain droop up to 4mm to 10 mm
--- Tighten the screw
--- Put left cover in original place
20
