--- 0pen checking door
--- Press the jam paper into the shred box
--- Close the checking door
--- Pull out the shred box totally
--- Take out the shred bag
--- Insert new shred bag, and make sure the shred bag is high 5cm than the
frame.
--- Insert the shred box
--- Open the main switch “on”
--- Loosen “emergency stop” switch
--- Make sure close the checking door and security top cover.
--- Make sure the shred box in right location
--- Press the green start button
5. Inspecting and maintenance
5.1 Maintenance of delivery belt
5.1.1 Inspecting the tightness of delivery belt
The delivery belt could not skid when the paper on it. The paper on the belt
should be delivered steadily,
The delivery belt skid, please adjust as follows:
--- Shut down, take out the paper feed table, then will see the tightness of the
delivery belt
--- Loosen the screw of tightness pulley
--- Tighten the screw to adjust the tightness of delivery belt
19
