4.
Product handing and storage
. .
8
.9.
3.3 Keypad
3.4 LCD
There are four keys in the front panel of the Inverter(from left to right): ESC, UP, DOWN
and ENTER keys. The keypad is used for:
Scrolling through the displayed options (the Up and the Down keys).
.
The two-lines Liquid Crystal Display (LCD) is located at the front panel of the Inverter,
which shows the following information:
1. Inverter operation status and data;
2. Service messages for operator;
3.Alarm messages and fault indications.
Description
The inverter can detect DC power
No DC power or low DC power
The inverter is operating properly.
The inverter has stopped supplying power.
The inverter is initializing.
Alarm or fault condition is detected.
The inverter is operating properly.
Status
ON
OFF
ON
OFF
OFF
ON
FLASHING
Light
POWER
OPERATION
ALARM
Access to modify the adjustable settings (the ESC and the ENTER keys).
3. Overview
Table 3.1 Status indicator
4.1 Product handing
Please
refer
below
to
handing
the
product
:
1.The red mark is used for handle the product with package. The product need two persons to
carry.
(
as
shown
in
figure
4
.
1
)
Figure
4
.
1 move the inverter
2.After open the package, it's recommend two person to get the inverter out of package.
Please handle the side of heat-sink when carry the inverter.
(
as
shown
in
figure
4
.
2
)
Figure
4
.
2 carry out the inverter
