Figure 7.29 Setting the total generating capacity
Adjusting total generating power
2015-02-23 19 35
Total generating power:
0002616kWh
7.5.5 Calibrate Energy
By using our data monitoring hardware, the data on monitoring website can automatically
synchronize with the preset total generating power of inverter.
Warranty or maintenance may result in reseting total generating data, this function allow
the maintenance personnel to amend the total generating data of replacement inverter to
the original one.
7.5.4 Clear Energy and Restore Factory Settings
Clear Energy can reset the history yield of inverter, restore factory settings means all the
settings are restored to default settings.
These two functions are applicable by maintenance personnel only, wrong
operation will prevent the inverter from working properly.
This function is applicable by maintenance personnel only, wrong operation
will prevent the inverter from reaching maximum power.
Press the DOWN key to move the cursor, Press the UP key to revise the value. Press the
ENTER key to execute the setting. Press the ESC key to return to the previous menu.
E S C
U P
D O W N
E N T
Y E S
=
< E N T >
N O
=
< E S C >
7. General Operation
7. General Operation
Calibrate
7.5.6 Change Password
First enter the current password, Press the DOWN key to move the cursor, press the
UP key to revise the password figure.
After entering the correct password, you can create a new password.Upon confirming
the new password, press the ENTER key to execute the setting.(See Figure 7.31).
Figure 7.30 Password setting
Figure 7.31 Setting new password
Password
2015-02-23 19 35
Please Input The Current Password
X
X
X
X
E S C
U P
D O W N
E N T
Y E S
=
< E N T >
N O
=
< E S C >
Reset
Password
2015-02-23 19 35
Please
Input
New
Password
X
X
X
X
E S C
U P
D O W N
E N T
Y E S
=
< E N T >
N O
=
< E S C >
.40.
.41.
