NIMO ETS 1700, Installation And User Manual

Page: 11 / 28

11
The door can also be rehung when the
cabinet is already bolted to the wall and
thus cannot be laid on its back.
1 Undo the lower hinge pin (1) from
the bottom hinge and lift off the
door. The pin is fastened using a No.
10 sized key.
2 Undo and unscrew the upper of the
two hinge screws
(3 )
and loosen the
lower one a little. Rotate the hinge to
the side. Refit the upper screw.
3 Undo the lower mounting screw and
remove the hinge. Refit the screw.
4
Mount the hinge in its new position
in reverse order, i.e. start by securing
the hinge with the lower screw. This
prevents the threaded washer from
becoming loose which could make
it difficult to access the inside of the
base.
5
Undo the hinge pin from the top
hinge
(2)
and place it on the opposite
side.
6 Rotate the door, align and secure the
door with the lower hinge pin
(1) .
Rehanging the door when the cabinet is fixed to the wall
INSTALLATION