27
PARAMETER ADJUSTMENT
Use the control panel to access the pa-
rameter list of the drying cabinet. The
parameter list appears one line at a time
on the control panel display.
Procedure:
1
Make sure that the main
ON/OFF
switch of the drying cabinet is off and
that the indicator ( item 2) is also off.
2
Hold down the minus
“-”
and plus
“+”
buttonsand set the main
ON/
OFF
switch to
“ON”.
This is indicated
by a green light . The display lights up
and shows
“P1”
(parameter 1) and
the factory setting for
P1.
3
Press the
“MAN”
button several
times to step to the required pa-
rameter. If you overshoot, continue
pressing until the display shows the
correct parameter.
4
When the display shows the correct
parameter (
P8
,
for example), use the
plus and minus buttons to increase or
reduce the setting.
5
To save the settings and return to
operating mode, press the
START/
STOP
button. The display now
shows the last programme used.
NOTE: How to restore the parameters
to the factory settings:
1
Go to parameter display mode as
explained at steps 1 and 2 above.
2
Hold down the
“40°”
button and
press the
START/STOP
button. The
parameter list re-appears and the
display shows Parameter 1 and the
factory setting for
P1.
3
To save the factory settings and
return to operating mode, press the
START/STOP
button. The display
now shows the last programme
PARAMETER ADJUSTMENT ETS 1700E / 1900E
Summary of Contents for ETS 1700
Page 28: ...Gematech Innovation ...
