NIMO ETS 1700, Installation And User Manual

Page: 19 / 28

19
DRYING PROGRAMME
The drying cabinet is equipped with two automatic programmes:

AUT 40°

AUT 60°
In addition, the drying cabinet has four time-controlled programmes:

MAN 30°

MAN 40°

MAN 60°

MAN --° Only the fan is used during the drying process – No heat
The automatic programmes shut off the drying process automatically when the
fabrics are dry.
The manually time-controlled programmes
come to an end after the set time has
been counted down.
All the 30°, 40° and 60° programmes finish with a cooling down period of 10 minutes.
DRYING FUNCTION
Start the drying programme:

Last used drying programme.
Press the main power switch
(1)
to the
ON
position - Indicated by a green light
(2)
The display shows the last run programme – If this is the one wanted, press the
START/STOP
button
(4)
Or select another drying programme described below.

Automatic programmes.
Automatic programme 40°
- Press the ” 40°” button
(5),
then
START/STOP (4).
Automatic programme 60°
- Press the ” 60°” button
(6)
, then
START/STOP (4)

Manual time control.
Using the MAN button (7) to step through to the desired temperature, 30°, 40°, 60° or
only fan. The display shows the standard drying time for the respective programme.
The standard time can, if desired, be increased or reduced with the
”+” (8)
or
”-” (9)
buttons
After that, the drying programme is started with the
START/STOP
button
(4).
USING THE ETS 1700E / ETS 1900E DRYING CABINET