NIMO ECO Dryer 2.0 HP, Service Manual

Page: 6 / 24

1
2
3
4
5
6
Service manual
The picture illustrates rehanging from right-
hung to left-hung
3 Rehanging the door
The cabinet is supplied from the factory either right-hung or left-hung. The door can be subse-
quently rehung.
A rehanging kit is needed to rehang the door. This can be ordered as a spare part.
Rehanging kit
p
Splice connectors for cables.
p
New cable with plastic bushing.
p
Upper hinges, 1 right and 1 left.
1 Detach the cabinet from the
wall and turn it to gain access
to the rear.
2 Detach the three screws (1)
holding the cover as illustra-
ted and disassemble the lid.
3 Carefully lay the cabinet on its
back.
4 Remove the cover (2) of the
upper hinge and release the
door cable (3) and detach
the cable from the coupling
(4). Disassemble the upper
hinge (4) which is attached by
two screws. Carefully pull the
hinge away from the cable.
The hinge is provided with
a slot where the cable is th-
readed in or out.
5 Lift the door away from the
drying cabinet
Upper hinge