NIMO ECO Dryer 2.0 HP, Service Manual

Page: 13 / 24

13
Service manual
7 Drying function
7.1 Start the drying programme
p
Last used drying programme
Press the ON/OFF switch to the “ON” position, indicated by the display lighting up and
showing the last run programme.
After a few seconds the display will show the last run programme. If this is the programme
you want, press START/STOP.
Or choose another drying programme by stepping up or down.
Then start the drying programme with the START/STOP button.
p
Door open
If the door is open when the drying programme is started and the START/STOP button is
activated, the display shows
“CLOSE DOOR”.
Close the door and the selected drying programme will start.
p
In operation
The animated symbol (bar) on the left-hand side of the display indicates that the drying
process is in progress.
p
Condensation water tank
If the condensation water tank becomes full, the drying process is immediately discontinued
and the display will show
“CHECK WATER TANK”.
Empty the water tank and re-start the
drying process.
p
Cooling
During the cooling period the display shows the text
“COOL”
and counts down 5 min,
remaining time.
p
Programme end
When the cooling period has ended, the drying process is finished, and the display shows
the text
“END”
(flashing).
When the START/STOP button is pressed or the door is opened, the current programme
is stopped and the display shows the most recently used programme.