NimbeLink NL-M1DK User Manual Download Page 21

Page: 21 / 24

5. Next Steps

Now that you have verified that you can communicate with the Skywire modem, and

that it's registered on the network, you are ready to start building your

cellular-connected device. Most users will be using the PPP functionality, or perform raw

socket dials. Here are application notes to get you started:

CAT M1 PPP on BeagleBone Black -

http://www.nimbelink.com/Documentation/Skywire/4G_LTE_Cat_M1/30272_NL-SW-LT
E-SVZM21_PPP-on-CATM1_BBB.pdf

CAT M1 PPP on Raspberry Pi -

http://www.nimbelink.com/Documentation/Skywire/4G_LTE_Cat_M1/30273_NL-SW-LT
E-SVZM21_PPP-on-CATM1_RPi.pdf

CAT M1 Socket Dials -

http://www.nimbelink.com/Documentation/Skywire/4G_LTE_Cat_M1/1001412_NL-SW-L
TE-SVZM_SocketDialAppNote.pdf

CAT M1 SMS Messages Application note - (Coming soon)

Be sure to keep an eye on the NimbeLink website for the NL-SW-LTE-SVZM20 family of

Skywire modems, as well as the website for the NL-M1DK-x Development Kit for

updates and examples.

Additional Resources

Technical Resources

All documentation for the Skywire M1 modem and development kit:

http://nimbelink.com/skywire-4g-lte-cat-m1/#docs

General Information

NL-SW-LTE-SVZM20 Website -

http://nimbelink.com/skywire-4g-lte-cat-m1/

NL-M1DK Website -

http://nimbelink.com/skywire-m1dk/

PN 30192 rev 10

Summary of Contents for NL-M1DK
























Search results

Summary of Contents for NL-M1DK

Reviews:

Brands by name

Popular brands

NimbeLink NL-M1DK, User Manual

Search results

Summary of Contents for NL-M1DK

Reviews:

Brands by name

Popular brands