56043021
- 260, 32, 38, 320, 380
VACUUM SYSTEM
4
See Figure 2. Remove cover “B” from the vacuum motor.
5
Remove the black plastic cover from the end of the vacuum motor.
6
Remove one of the brush holders and remove the carbon brush from the motor.
7
Measure the length of the brush. Replace both brushes if it is 3/8 inch (10 mm) or shorter.
8
Reassemble in reverse order and test for proper operation.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
VACUUM MOTOR - CARBON BRUSH INSPECTION - 260 (continued...)
FIGURE 2
Front
B
34
