30
2
1
3
Operator’s Manual City Ranger 3500
Cover
2.1 Assembly/disassembly of the control
panel
Fitting the control panel:
Before use, make sure that the control panel matches the
attachments installed on the vehicle. (See the attachment
operator’s manual).
1. Unplug the electrical connector from the installed
control panel or remove the cover. (Picture 1)
2. Unscrew the binding toothed wheel. (Picture 2)
3. Fit the control panel matching the attachment installed
on the vehicle, and fasten it with the toothed wheel.
(Picture 2)
4. Plug in its electrical connection. (Picture 2)
Make sure the connector is properly inserted and locked
in position.
5. If there is no control panel installed, fit the electrical
connection protection cover. (Picture 3)
Pre-start checks:
When the attachment is fitted to the vehicle, check the
operation of the different controls on the panel.
Disassembly:
Follow the procedure for fitting in reverse order.
Electrical connector
Binding toothed wheel
Operator’s manual