11
110007944-EN
Software Manual_Pegasus.
C34 High Sensor
Signal block
1. Signal from block sensor, out of range
1. Press “off” button
2. If error reoccurs, contact your local
service technician.
C35 High Sensor
Signal flow
1. Signal from flow sensor, out of range
1. Press “off” button
2. If error reoccurs, contact your local
service technician.
C40 Sensor Load
Pumptop Sensor
1. Supply voltage for pumptop sensor too low.
2. Pumptop sensor using too much current
1. Press “off” button
2. If error reoccurs, contact your local
service technician.
C41 Sensor Load
Inlet sensor
1. Supply voltage for inlet sensor too low
2. Inlet sensor using too much current
1. Press “off” button
2. If error reoccurs, contact your local
service technician.
C42 Sensor Load
Block sensor
1. Supply voltage for block sensor too low
2. Block sensor using too much current
1. Press “off” button
2. If error reoccurs, contact your local
service technician.
C43 Sensor Load
Flow sensor
1. Supply voltage for flow sensor too low
2. Flow sensor using too much current
1. Press “off” button
2. If error reoccurs, contact your local
service technician.
C45 Inverter
Module temp.
1. Water consumption too high
2. Ambient temperature too high"
1. Lower the load for inverter
2. Lower the ambient temperature"
C46 Inverter
Board temp."
1. Water consumption too high
2. Ambient temperature too high
3. Load at Board high"
1. Lower the load for inverter
2. Lower the ambient temperature
3. lower the load at board"
5.3 Content of the Setup menu
The Setup Main menu contains the below submenus, which will be described subsequently.
Setup
C
0000
Password
CA
Settings
S
E
Password Note:
Default user password is 6802. Enter the settings menu
to change the default password. To avoid unintended access to the system
the Local service technician can insert a blocking preventing access to the
password controlled menus.
Languages &
L
F
units
Communication
I
PC
Installation
K
