background image

FORM NO. 56041258 / Aquamatic Selectric

 - 

7

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

BEFORE USING THE 

SELECTRIC

1

Thoroughly vacuum the carpet to be cleaned before using the 

Selectric

 automatic extractor.

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

FILLING THE SOLUTION TANK

1

Lift the front Solution Fill Cover 

(9)

 off the machine.

2

Read the dilution instructions on the chemical container.  Then figure the proper amount of chemical to mix with 25
gallons (94.5 liters) of water.  For best results, use the Advance CarpeTeam™ Extraction Cleaner chemical specially
formulated for use with Advance carpet extractors.

3

Pour the chemical in the solution tank and fill the tank with warm water to 2 inches below the inside edge of the opening.

4

Put the Solution Fill Cover back on the machine.

CAUTION!

Use only low-sudsing, liquid detergents designed for carpet extraction.

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

PRE-SPRAYING THE CARPET

Pre-spray spots and heavy traffic areas before extracting.  Use a hand-held bottle sprayer or a pressurized “Hudson”
type sprayer.  Mix the pre-spray according to the chemical manufacturer’s directions.  For best results, use the Advance
CarpeTeam™ Pre-Spray chemical specially formulated for use with Advance carpet extractors.

_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

PLAN FOR CLEANING

Before you begin extracting, look at the area to be cleaned and plan your work.  Divide the space into sections.  Overlap
each pass 2 inches (5 cm).

PREPARING THE MACHINE FOR USE

Summary of Contents for 56263501 Aquamatic Selectric
















Reviews: