10
- FORM NO. 56041258 / Aquamatic Selectric
™
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
WARNING!
Unplug the power cord before attempting any service or maintenance work to the machine.
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MAINTENANCE NOTE
With the tanks empty and the power cord unplugged, tip the machine forward onto its nose for access to the Power Brush,
Pick-Up Tool, and Spray Nozzle.
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
POWER BRUSH MAINTENANCE
Check the brush once a week. Remove any built-up string, hair or carpet fibers. Check the bristle length. Change the
brush when the brush bristles are worn to 1/4 inch (6 mm).
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
PICK-UP TOOL MAINTENANCE
Check the pick-up tool once a week. Remove any built-up string, hair or carpet fibers.
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
SPRAY NOZZLE MAINTENANCE
Remove the spray nozzle once a week. It is located under the machine just in front of the brush. Soak the nozzle
overnight in a vinegar and water solution to remove chemical deposits.
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
LUBRICATING THE MACHINE
Once a month (or every 30 hours), lubricate all pivot points on the pick-up tool. For best results, use a spray silicone
lubricant.
Once a month, pump grease into the grease fitting on the caster wheel until it seeps out around the bearing. Wipe off
the excess grease to avoid staining carpet.
MAINTENANCE
