FORM NO. 56041258 / Aquamatic Selectric
™
-
13
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
2 AMP WHEEL DRIVE CIRCUIT BREAKER
When the Wheel Drive Circuit Breaker
(17)
trips, check to see if there is debris wrapped around the wheel axle. Remove
the debris from the axle. Have the wheel drive motor checked for worn out brushes; repair or replace the motor if
necessary. Push the button to reset the circuit breaker.
If the circuit breaker trips repeatedly, call your local Advance Distributor for service.
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
6 AMP BRUSH DRIVE CIRCUIT BREAKER
When the Brush Drive Circuit Breaker
(16)
trips, check to see if the brush height is set too low or if there is debris wrapped
around the brush. Adjust the brush height or remove the debris from the brush. Push the button to reset the circuit
breaker.
If the circuit breaker trips repeatedly, call your local Advance Distributor for service.
_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
13 AMP VACUUM MOTOR CIRCUIT BREAKER
When the Vacuum Motor Circuit Breaker
(18)
trips, check the exhaust filter and clean or replace if necessary. Have the
vacuum motor checked for worn out bearings and/or brushes or bearing failure. Repair or replace the motor if necessary.
Push the button to reset the circuit breaker.
If the circuit breaker trips repeatedly, call your local Advance Distributor for service.
TROUBLESHOOTING