raulic S ste
Service Manual – SC8000
Maintenance an
ust ents
arnin
e ore er or in an ac ine aintenance or a ust ents a e sure t e e
s itc is o t e e is re ove ro t e ac ine an t e ar in ra e is en a e
raulic il
1. Open and prop the engine cover to access the
Hydraulic Oil Reservoir
.
2. Remove
the
Fill Cap
from the tank and look to
WKHERWWRPRIWKHÀOOHUVFUHHQ,IWKHRLOOHYHO
LVEHORZWKHERWWRPRIWKHÀOOHUVFUHHQDGG
:PRWRURLOXQWLOWKHERWWRPRIWKHÀOOHU
screen is covered. (The oil level should not be
higher than ½” [12.7 mm] above the bottom of
WKHÀOOHUVFUHHQ
3.
&KDQJHDQGÁXVKWKHRLOLIPDMRU
contamination from a mechanical failure
occurs.
raulic il lter
1. Release the latches and tip the
Hydraulic Oil Cooler
out away from the
machine.
2. Use a pan or other suitable container
to catch any oil that may leak out
when you remove the
Hydraulic Oil
Filter
.
3. Unscrew and remove the
Hydraulic Oil
Filter
.
4. Install the new
Hydraulic Oil Filter
.
5. Tip
the
Hydraulic Oil Cooler
back up
into position, then secure the latches.
6. Run the machine for a short time,
then check the oil level in the
hydraulic oil reservoir. Add oil as
necessary.
Fill
Cap
Hydraulic
Oil
Reservoir
Hydraulic
Oil
Cooler
Hydraulic
Oil
Filter