Nikon Speedlight SB-700 User Manual Download Page 83

Page: 83 / 191

–

Wireless Multiple Flash-unit Photography

(manual) mode:

In M mode, the remote flash units start firing in sync with the

•

master flash unit, but do not stop firing in sync with the master
flash unit.
Flash output levels of the master and remote flash units are

•

separately set.
The maximum distance the SB-700’s light sensor can detect is

•

approx. 40 m (131 ft.) in front of the master flash unit.
The flash output level can be set from M1/1 to M1/128.

•

(flash function canceled) mode:

Remote flash units do not fire, even when the master flash unit

•

fires.

To prevent the remote ash units from ring

accidentally

Do not leave the remote ash units’ power on. Ambient electrical noise
caused by static electricity or other such electromagnetic waves can
trigger them to re accidentally. Always turn the power off.

Summary of Contents for Speedlight SB-700
































































































































































































Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands

Nikon Speedlight SB-700, User Manual

Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands