Nikon Speedlight SB-700 User Manual Download Page 41

Page: 41 / 191

Operation

–

Settings and the LCD

Icons on the LCD show the status of settings. Displayed icons vary
according to selected ash modes and settings.

Configurable settings are highlighted when the [SEL] button is

•

pressed.
Highlighted settings can be changed with the selector dial.

•

The basic control of SB-700 functions is as follows:

•

Press the [SEL] button to highlight the selected

item.

Change the setting by rotating the selector dial.

Press the [OK] button to con rm setting.

Once confirmed, the highlighted item returns to normal display.

•

If the [OK] button is not pressed, the highlighted item is

•

confirmed and returns to normal display after 8 seconds.

If there is a configurable

•

setting, an icon indicating
the setting appears in
the bottom right corner.
If there are two or more
configurable settings, the SEL
icon is displayed, indicating
configurable items can
be selected with the [SEL]
button.

Summary of Contents for Speedlight SB-700
































































































































































































Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands

Nikon Speedlight SB-700, User Manual

Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands