Nikon Speedlight SB-700 User Manual Download Page 132

Page: 132 / 191

–

Tips on Speedlight Care and Reference Information

Warning indicators

Warning indicator

Cause

Solution

Battery power weak
indicator appears.

All operations have
stopped due to low
battery power.

Replace the
batteries.

B-10

Thermal cut-out
indicator appears.

All operations have
been suspended
because the SB-700
has overheated
and could become
damaged.

Allow the SB-700 to
cool down.

E-31

Safety circuit activation
indicator appears.

All functions other
than the power
switch are inoperable
because of power
abnormalities.

Turn off the power,
remove the batteries,
and contact your
retailer or Nikon
representative.

—

The ash-ready
indicator blinks after
ring.

Underexposure may
have occurred.

Use a wider aperture
or move the ash
unit closer to the
subject and reshoot.

C-5

C-15
D-28

The remote ash unit
beeps for approx.
3 seconds.

Underexposure may
have occurred.

Use a wider
aperture, move the
ash unit closer
to the subject or
change the position
of the ash unit and
reshoot.

D-28

Troubleshooting

Summary of Contents for Speedlight SB-700
































































































































































































Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands

Nikon Speedlight SB-700, User Manual

Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands