Nikon Speedlight SB-700 User Manual Download Page 34

Page: 34 / 191

Operation

–

1.5 V alkaline AA battery

1.5 V lithium AA battery

Rechargeable 1.2 V NiMH AA battery

Suitable batteries

When replacing batteries, use four fresh AA-type batteries of the same
brand from any of the following types:

For minimum recycling time and number of flashes for each battery

•

type, refer to “Specifications.” (

H-27)

Alkaline battery performance may vary greatly depending on the

•

manufacturer.
1.5 V carbon-zinc AA batteries are not recommended.

•

Additional precautions regarding batteries

Read and follow battery warnings and cautions (

•

A-19 – A-22).

Be sure to read and follow the warnings for the battery on the

•

section, “Notes on Batteries” (

H-9), before using the battery.

The recycling time can be longer when lithium AA batteries are used

•

because they incorporate a function that suppresses the output
current when heat is generated in the batteries.

Basic Operations

Summary of Contents for Speedlight SB-700
































































































































































































Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands

Nikon Speedlight SB-700, User Manual

Search results

Summary of Contents for Speedlight SB-700

Reviews:

Related manuals for Speedlight SB-700

Brands by name

Popular brands