manualshive.com logo in svg

Nikon N1933, Reference Manual, Page: 732 / 778

Share
Download
Nikon N1933 Reference Manual Download Page 732

690

Approved Memory Cards

•

The camera can be used with SD, SDHC, and SDXC memory 
cards.

•

UHS-I and UHS-II are supported.

•

Cards rated UHS Speed Class 3 or better are 
recommended for movie recording and playback. Slower 
speeds may result in recording or playback being interrupted.

•

When choosing cards for use in card readers, be sure they are 
compatible with the device.

•

Contact the manufacturer for information on features, 
operation, and limitations on use.

Approved Memory Cards

Summary of Contents for N1933











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments