Nikon N1933 Reference Manual Download Page 526

Page: 526 / 778

484

The Retouch Menu: Creating Retouched Copies

Preview the overlay.

•

To preview the overlay, highlight
[

Overlay

] and press

•

To select new photos or adjust gain,
press

(

). You will be returned to

Step 6.

Save the overlay.

Press

while the preview is

displayed to save the overlay and
display the resulting image.

Summary of Contents for N1933











































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N1933

Reviews:

Nikon N1933, Reference Manual, Page: 526 / 778

Search results

Summary of Contents for N1933

Reviews: