manualshive.com logo in svg

Nikon N1933, Reference Manual, Page: 118 / 778

Share
Download
Nikon N1933 Reference Manual Download Page 118

76

Focus

The Touch Shutter

Touch the display to focus on the 
selected point. The shutter will be 
released when you lift your finger from 
the display.

Tap the icon shown in the illustration to 
choose the operation performed by 
tapping the display.

Option

Description

W

•

Touch the display to focus on the selected point and lift 
your finger to release the shutter. If an option other than 
[

Off

] is selected for Custom Setting a4 [

Auto-area AF 

face/eye detection

] and the camera detects human faces 

or eyes or the faces or eyes of dogs or cats, the camera will 
focus on the face or eye

*

 closest to the selected point.

•

Available only in photo mode.

V

•

Touch the display to focus on the selected point. Lifting 
your finger from the display does not release the shutter.

•

If auto-area AF is selected for AF-area mode, the camera 
will track the selected subject as it moves through the 
frame. To switch to a different subject, tap it in the display. 
If an option other than [

Off

] is selected for Custom Setting 

a4 [

Auto-area AF face/eye detection

] and the camera 

detects human faces or eyes or the faces or eyes of dogs or 
cats, the camera will focus on and track the face or eye

*

 

closest to the selected point.

X

Touch shutter disabled.

Summary of Contents for N1933











































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments