Nikon KEYMISSION 360 Quick Start Manual Download Page 81

Page: 81 / 178

Parts of the Camera

Lamp Display

Status Lamp

Status

Color

Description

On at the same time

Green

The camera is connected to a TV with an HDMI
cable.

Red

The camera is recording a movie.

Alternately flashing

Green

The camera is on standby for pairing (

11).

Flashing at the same

time

Green

•

Pairing is complete.

•

The camera is capturing a still image.

•

The self-timer is counting down.

Red

•

The camera is saving a movie.

•

Pairing failed.

Red/Green

The firmware is being updated.

Quick flashing at the

same time

Red

•

A memory card is not inserted (

6).

•

The inside of the camera has become hot. The
camera turns off automatically. Wait until the
camera or battery temperature has cooled
before resuming use.

•

The firmware version update failed.

Summary of Contents for KEYMISSION 360



















































































































































































Search results

Summary of Contents for KEYMISSION 360

Reviews:

Related manuals for KEYMISSION 360

Brands by name

Popular brands

Nikon KEYMISSION 360, Quick Start Manual

Search results

Summary of Contents for KEYMISSION 360

Reviews:

Related manuals for KEYMISSION 360

Brands by name

Popular brands