Nikon KEYMISSION 360 Quick Start Manual Download Page 61

Page: 61 / 178

Playing Back Images

•

Playing back using the SnapBridge 360/170 app, the KeyMission 360/170
Utility, or a TV (HDMI connection):

Part of the single image that was processed in the camera is displayed and you can
play back while moving the point of view.

•

Playing back using other software:

The single image that was processed in the camera is displayed. You cannot move
the point of view during playback.

Operations Available with the SnapBridge 360/170 App

•

Remote photography

Release the shutter from places away from the camera.

•

Changing camera settings

Change settings related to the camera’s date and time, shooting, or lamp
brightness.

•

Image playback and editing

Play back images, crop still images, edit movies, or extract still images from movies.

See the SnapBridge 360/170 app online help for more information.

Summary of Contents for KEYMISSION 360



















































































































































































Search results

Summary of Contents for KEYMISSION 360

Reviews:

Related manuals for KEYMISSION 360

Brands by name

Popular brands

Nikon KEYMISSION 360, Quick Start Manual

Search results

Summary of Contents for KEYMISSION 360

Reviews:

Related manuals for KEYMISSION 360

Brands by name

Popular brands