Nikon D7000, User Manual

Page: 245 / 348

225
U
❚❚
Commander Mode
Use the built-in flash as a master flash controlling one or more remote optional
SB-900, SB-800, SB-700, SB-600, or SB-R200 flash units in up to two groups (A and B)
using advanced wireless lighting.
Selecting this option displays the menu shown at right. Press
4
or
2
to highlight the following options,
1
or
3
to change.
Option Description
Built-in
flash
Choose a flash mode for the built-in flash (commander flash).
TTL
i-TTL mode. Choose flash compensation from values b3.0 and –3.0 EV in
increments of
1
/
3
EV.
M
Choose the flash level from values between 1/1 and 1/128 (
1
/
128
of full power).
– –
The built-in flash does not fire, although remote flash units do. The built-in flash
must be raised so that it can emit monitor pre-flashes.
Group A Choose a flash mode for all flash units in group A.
TTL
i-TTL mode. Choose flash compensation from values b3.0 and –3.0 EV in
increments of
1
/
3
EV.
AA
Auto aperture (available only with SB-900 and SB-800 flash units). Choose flash
compensation from values b3.0 and –3.0 EV in increments of
1
/
3
EV.
M Choose the flash level from values between 1/1 and 1/128 (
1
/
128
of full power).
– – The flash units in this group do not fire.
Group B
Choose a flash mode for all flash units in group B. The options available are the
same as those listed for
Group A , above.
Channel
Choose from channels 1–4. All flash units in both groups must be set to the same
channel.