9
4.
Mounting the Camera
Please carefully read the safety instructions and the instructions on how to attach the lens in
the camera's manual before you start with the installation.
•
Assemble the lens to the camera as described in the camera's manual.
•
In case it has not already been installed: Insert the power connector into the camera
as described in the User Guide of the power connector.
•
Insert the camera to the opening of the lens bracket with the lens facing down and
the rear display facing up.
For this and the following steps make sure to always keep at least one hand on the camera
lens. Make sure that the camera is sitting on the lens bracket with its full weight and is
covering the opening completely.
•
Slide the camera mount close to the bottom of the camera.
•
Now move the camera screw in the slot of the camera mount to the height of the
camera's tripod socket (see camera manual).
•
Tighten the camera screw.
•
As last step tighten the fixing screw, so that the camera mount can no longer be
moved.
!
!
