2
o
DO NOT use flammable substances, spray, or organic solvent / liquids containing alcohol or
ammonia to clean the inside or outside of the device. Otherwise fire or electric shock can
occur. Turn off the device when it is not in use for more than an hour. Unplug the power
cord when not using the unit for more than one day.
o
DO NOT use the device if the power cord is damaged to avoid electric shock or fire.
o
DO NOT connect the camera (neither DC nor USB) when the xTex device is switched on. This
can cause serious damage to the xTex device.
o
When you are leaving the office or not using the xTex device for several hours always switch
the device off using the main power switch.
Repair, Product liability and Warranty Service:
Do not attempt to repair this product yourself, as opening or removing covers may expose
you to dangerous current-carrying parts and other risks and may void your warranty.
For repair service please contact the support: [email protected]
Do not use the unit in a humid environment or near water sources, such as hand basins etc.
Avoid the use of this device during a thunderstorm.
Declaration of Conformity (Europe only):
We, Vizoo GmbH
Johann-Karg-Str. 30, 85540 Haar, Deutschland
declare, that this product is in compliance with the essential requirements of the directives
2006/95/EG and 2004/108/EG.
The declaration of conformity can be found on our website:
http://vizoo3d.com/xtex/EC-Declaration-of-Conformity.pdf
