Nikon COOLPIX 56300, Quick Start Manual

Page: 232 / 263

E
95
Error Messages
Refere
nce S
e
ct
io
n
Shooting failed
When taking 3D pictures, the first shot could not be
successfully taken.
• Try shooting again.
• In some shooting conditions, such as when the
subject is moving, dark, or low in contrast, shooting
may not be possible.
E
5
Failed to take second
shot
When taking 3D images, the second shot could not be
successfully taken after the first shot.
• Try shooting again. After taking the first shot, move
the camera horizontally and frame the subject so that
it is aligned with the guide.
• In some shooting conditions, such as when the
subject is moving, dark, or low in contrast, the second
shot may not be taken.
E
5
–
Failed to save 3D
image
Failed to save the 3D images.
• Try shooting again.
• Delete unnecessary images.
• 3D images may not be created depending on the
shooting conditions, such as when the subject is
moving, dark, or low in contrast, and they cannot be
saved.
E
5
34
–
Lens error
Lens error.
Turn camera off and then on again. If error persists,
contact retailer or Nikon-authorized service
representative.
22
Communications error
Error occurred during communication with printer.
Turn camera off and reconnect USB cable.
E
26
System error
Error has occurred in camera’s internal circuitry.
Turn camera off, remove and reinsert battery, and turn
camera on. If error persists, contact retailer or Nikon-
authorized service representative.
16, 23
Printer error: check
printer status.
Printer error.
Check printer. After solving the problem, select
Resume and press the
k
button to resume printing.*
–
Printer error: check
paper
Specified size of paper is not loaded in printer.
Load the specified paper size, select
Resume , and press
the
k
button to resume printing.*
–
Display Cause / Solution
A