Nikon AF-S DX Zoom Nikkor 18-135/3.5-5.6G ED, Repair Manual

Page: 91 / 98

JAA79651-R.3695.A
- Ａ70 ･ AF-S DX 18-135/3.5-5.6G -
⑮
The reconfirmation screen is displayed. Click "OK".
⑯
An hourglass is displayed on the screen, and writing starts.
The below screen is displayed after a few seconds. Turn camera OFF and turn it ON again.
Click "OK", and the adjustment software restarts.
Note: Unless the camera is turned off once, the value that was written in EEPROM is not reflected.
⑰
When the adjustment software restarts, perform the operations from
②
to
⑫
again. Check that
"0μm" of the AF position is in focus.
(It is also possible, after Wide-side shooting of
⑫
, to take the Tele-side shooting of
②
.)
If "0μm" is not in focus, repeat the operations from
②
to
⑰
.
If it is not still in focus even after repetition, the written value in EEPROM may be abnormal. So click
"Design value Rewriting" to write the initial value, then proceed with the operations.