Nikon 26253, Quick Start Manual

Page: 153 / 196

116
Setup Menu
Basi
c Came
ra Setup
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (
A
15).
Use this option to set the amount of time that passes before the camera enters
standby mode.
d
button
M
z
(Setup menu) (
A
104)
M
Auto off
Auto off
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from
30 s (default setting), 1 mi n , 5 mi n , and 30 mi n .
Sleep mode
If O n (default setting) is selected, the camera will enter standby mode when there
is no change in the brightness of the subject, even before the time selected in the
auto off menu has elapsed. The camera will enter sleep mode after 30 seconds
when
Auto off is set to 1 mi n or less, or after 1 minute when Auto off is set to
5 mi n or more.
C
Whe n the Mo n itor Has Tur n ed Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for another three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, pressing the following buttons will turn the monitor back on.
➝
Power switch, shutter-release button,
A
button,
c
button, or
b
(
e
movie-record) button
C
Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• While menus are displayed: 3 minutes
• During slide show playback: Up to 30 minutes