92
14. Indoor motion detector
14. Indoor motion detector
Description
The indoor motion detector detects moving heat sources and activates or deactivates Niko Home Control functions.
Overview
Operation
The indoor motion detector detects moving heat sources by using Passive Infrared Technology (PIR). When motion is
detected, the motion detector activates or deactivates certain Niko Home Control functions. These functions are assigned
while programming the installation by linking functions to the unique address of each indoor motion detector.
When a person enters the detection area, the motion detector initiates the starting behaviour. When the person has left the
detection area or remains motionless within the area (up to 10 s after last detection) the stopping behaviour will be
initiated.
The indoor motion detector includes a manual mode option. In manual mode, the indoor motion detector will behave as if
there were permanent motion. Press the manual mode button to activate or deactivate this mode. If manual mode is not
deactivated, the function linked to that motion detector will remain active for 4 hours.
A.
Manual mode button /
address button
The function of this button is twofold:
• the button activates manual mode.
• while programming the installation, this
button sends the unique address of the
motion detector during the addressing
phase.
B.
Sensor
The sensor lights up when manual mode is
activated.
Consists of two components:
550-20210 (base) and 1xx-55511 (sensor)
B
A
