10-850
57
nv
Niko
sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: [email protected] — www.niko.eu EN
5.14. Setting the time for the entering of a telephone number
Upon delivery, the duration of time allowed to enter a telephone number is set to three seconds (X = 3).
Setting the entering time
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
26 X
✱
where:
- X = number from 0 to 9 (in seconds)
1
You have changed the duration of time allowed to enter a telephone
number.
3.
Exit the programming mode.
1
If you select the number 0, you must wait for the ring tone. This is handy if a call to a GSM number or to another external number must be diverted.
The diversion of calls like this takes longer.
5.15. Activating call diversion
When a call to the external unit is not answered on the first programmed telephone, you can divert the call. The telephone interface can also start a
call with a diverted call from an internal unit.
To assign a telephone number to a telephone address, consult section 5.4.
Activating call diversion
Step
Action
Result
1.
Activate programming mode.
2.
Enter the key combination:
27 XX YY
✱
where:
- XX = telephone address of the first telephone to be called
- YY = telephone address of the second telephone to be called
(successor)
The call is diverted to the telephone that you have assigned as the
successor.
3.
To erase the second telephone, enter the key combination:
27 XX
✱
where:
- XX = telephone address of the second telephone to be called
(successor)
The call is no longer diverted to the telephone that you have
assigned as the successor.
4.
Exit the programming mode.
You can also set linear and circular structures:
• Example of a linear call diversion: 10 > 11 > 12
You enter the key combinations:
27 10 11
✱
27 11 12
✱
• Example of a linear call diversion: 10 > 11 > 12 > 10
You enter the key combinations:
27 10 11
✱
27 11 12
✱
27 12 10
✱
Note:
If you utilize the call diversion function, you must set up the telephone interface so that conversations are started with key 7 (see section 5.7.).